Pecan Herringbone Floor

For this home, we installed  7" X 28" Pecan flooring in a Herringbone pattern. This pattern creates a unique look and can add a lot to the feel of a home. This floor has a Whisper Gray stain color with a antique brown glaze and a semi-gloss, acid finish.

Private Residence built by Jaffa Group

 After installation and wire brushing, we buffed a white Magic Oil finish onto the floor. The final result is stunning.

Private Residence built by Jaffa Group

After laying the cork underlay, we installed a farmhouse pattern using 3, 5, 4 and 8-inch board widths. This look makes the floor have a unique pattern. Notice the floor joints do not run in lateral lines, because of the different sizes of board widths installed together in a common row.

After installation, we did a heavy wire-brush texture on the floor, which is noticeable in this photo.

Private Residence Built by Jaffa Group

For this home, we laid down a cork underlay for sound absorption. This makes the noise quieter for the levels below and creates a more comfortable surface impression for walking. This is the process of laying the cork below the wood flooring.

Colony Lot 172 Final Stage-- Park City Parade of Homes House 4

This home, done for Jaffa Group is featured in the Park City Parade of Homes, House number 4. For the final look of this floor, we hand-buffed Magic Oil grey onto the 8" White Oak using the iron buff technique. To see this floor in person, visit the Park City Parade of Homes from August 29 - September 1.

Colony Lot 172-- Park City Parade of Homes House 4

For this home, we custom installed an 8" White Oak wood floor over a radiant heat Warmboard. We did a wired brush texture with an old world staining technique known as iron buff. We used a Magic Oil grey topcoat for the final look. This home was shown in the 2014 Park City Parade of Homes, House number 4. To see this home in person, visit The Park City Parade of Homes and purchase tickets and stop by from August 29 - September 1.

Roxbury Final Phase

After the stain, touch-up and first coat of finish, we have coated the final project with a satin, clear finish. The final project looks clean and smooth and requires little maintenance.